B3 - 075 - Glueing-Stars 3-level clamping range 980mm - solid anvils | |
* pneumatic heavy-duty Hold-Down-Clamps * overall length from 2600mm up to 6500mm * adjusting stops in series |
* Twin-Hold-Down-Clamps usable * index safety system in all machines * glueing under angles possible |
ALTEC POWER-LINE-075 PRESSURE BEAM SYSTEM | ||||
force of pressure 80.000 N/m | angle compensation 70 mm | press stroke 100 mm | ||
Glueing-Stars with the clamping range of 950mm. The clamping range is limited by an solid anvil of 120mm. All machines equipped with ALTEC-POWER-LINE-PRESSURE-BEAM PL-075. The PL-075 is charactered through the press stroke of 100mm, the angle compensation of 70mm. The force of pressure reach with 10 bar air-pressure at 80.000N (8 to) per meter press length. The glueing height is limited by the Hold-Down-Clamps to 130mm. Two Hold-Down-Clamps are placed in one bridge. The pneumatic actuation operate with an hold-down pressure of 6000N per Hold-Down-Clamp.
Possible equipment for glueing tables
are:
Adjusting stops for different glueing depth, or for glueing under an angle.
Twin-Hold-Down-Systems with two sidemoveable Hold-Down-Clamps for every pressure
beam.
This side shows only the main combinations of these machines.
For an individual combination of the possible subassembleys ask for a not binding offer.