C1 - 075 - Glueing-Tables 1-level clamping range 1330mm - solid anvils
* pneumatic heavy-duty Hold-Down-Clamps
* overall length from 2600mm up to 6500mm
* adjusting stops in series
* Twin-Hold-Down-Clamps usable
* index safety system in all machines
* glueing under angles possible

ALTEC POWER-LINE-075 PRESSURE BEAM SYSTEM
 force of pressure 80.000 N/m       angle compensation 70 mm       press stroke 100 mm 
   

Glueing-Tables with the clamping range of 1330mm. The clamping range is limited by an solid anvil of 120mm. All machines equipped with ALTEC-POWER-LINE-PRESSURE-BEAM PL-075. The PL-075 is charactered through the press stroke of 100mm, the angle compensation of 70mm. The force of pressure reach with 10 bar air-pressure at 80.000N (8 to) per meter press length. The glueing height is limited by the Hold-Down-Clamps to 130mm. Two Hold-Down-Clamps are placed in one bridge. The pneumatic actuation operate with an hold-down pressure of 6000N per Hold-Down-Clamp.

Possible equipment for glueing tables are: Adjusting stops for different glueing depth, or for glueing under an angle. Twin-Hold-Down-Systems with two sidemoveable Hold-Down-Clamps for every pressure beam.

SchrägausgleichDoppelniederhalterThis example shows only the main combinations of these machines.

For an individual combination of the possible subassembleys ask for a not binding offer.