| C2 - 075 - Glueing-Stars 2-levels clamping range 1300mm - moveable anvils | |
| * pneumatic heavy-duty Hold-Down-Clamps * overall length from 2600mm up to 5200mm * adjusting stops in series |
* Twin-Hold-Down-Clamps usable * index safety system in all machines * glueing under angles possible |
| ALTEC POWER-LINE-075 PRESSURE BEAM SYSTEM | ||||
| force of pressure 80.000 N/m | angle compensation 70 mm | press stroke 100 mm | ||
|
|
|
||
Glueing-Stars
with the clamping range of 1300mm. The clamping range is limited by moveable
adjusting stops with different depths. The price examples on this page includes
the standard adjusting stops for glueing between 20mm and 60mm in required piece
number. All machines equipped with ALTEC-POWER-LINE-PRESSURE-BEAM PL-075. The
PL-075 is charactered through the press stroke of 100mm, the angle compensation
of 70mm. The force of pressure reach with 10 bar air-pressure at 80.000N (8
to) per meter press length. The glueing height is limited by the Hold-Down-Clamps
to 130mm. Two Hold-Down-Clamps are placed in one bridge. The pneumatic actuation
operate with an hold-down pressure of 6000N per Hold-Down-Clamp.
Possible equipment for glueing tables
are:
Adjusting stops for different glueing depth, or for glueing under an angle.
Twin-Hold-Down-Systems with two side moveable Hold-Down-Clamps for every pressure
beam.
These
examples only show the main combinations of these machines. For an individual
combination of the possible subassembleys ask for a not binding offer.