E2 - 065 - Glueing-Stars 2-levels clamping range 1050mm - moveable anvils | |
* mechanical or pneumatic Hold-Down-Clamp * overall length from 2500mm up to 5000mm * adjusting stops usable |
* Twin-Hold-Down-Clamps usable * index safety system in all machines * glueing under angles possible |
ALTEC POWER-LINE-065 PRESSURE BEAM SYSTEM | ||||
force of pressure 60.000 N/m | angle compensation 50 mm | press stroke 80 mm | ||
![]() |
![]() |
![]() |
Glueing-Stars
with the clamping range of 1050mm. The clamping range is limited by moveable
adjusting stops with different depths. The price examples on this page includes
the standard adjusting stops for glueing between 16mm and 50mm in required piece
number. All machines equipped with ALTEC-POWER-LINE-PRESSURE-BEAM PL-065. The
PL-065 is charactered through the press stroke of 80mm , the angle compensation
of 50mm. The force of pressure reach with 10 bar air-pressure at 60.000N (6
to) per meter press length. The glueing height is limited by the Hold-Down-Clamps
to 115mm. Two Hold-Down-Clamps are placed in one bridge. The actuation is alternatively
in mechanic or in pneumatik versions available an operate with an hold-down
pressure of 2900N per Hold-Down-Clamp.
Possible equipment for glueing tables
are:
Adjusting stops for different glueing depth, or for glueing under an angle.
Twin-Hold-Down-Systems with two sidemoveable Hold-Down-Clamps for every pressure
beam.
This
example shows only the main combinations of these machines.
For an individual combination of the possible subassembleys ask for a not binding offer.