EC1 - 065 - Glueing-Tables 1 level clamping range 1330mm solid anvil
* mechanical or pneumatic Hold-Down-Clamp
* overall length from 2500mm up to endless
* adjusting stops usable
* Twin-Hold-Down-Clamps usable
* index safety system in all machines
* glueing under angles possible

ALTEC POWER-LINE-065 PRESSURE BEAM SYSTEM
 force of pressure 60.000 N/m       angle compensation 50 mm       press stroke 80 mm 
   

Glueing-Tables with the clamping range of 1330mm. The clamping range is limited by an solid anvil of 80mm. All machines equipped with ALTEC-POWER-LINE-PRESSURE-BEAM PL-065. The PL-065 is charactered through the press stroke of 80mm , the angle compensation of 50mm. The force of pressure reach with 10 bar air-pressure at 60.000N (6 to) per meter press length. The glueing height is limited by the Hold-Down-Clamps to 115mm. Two Hold-Down-Clamps are placed in one bridge. The actuation is alternatively in mechanic or in pneumatik versions available an operate with an hold-down pressure of 2900N per Hold-Down-Clamp.

Possible equipment for glueing tables are: Adjusting stops for different glueing depth , or for glueing under an angle. Twin-Hold-Down-Systems with two sidemoveable Hold-Down-Clamps for every pressure beam.

  Schrägausgleich

This examples show only the main combinations of these machines. For an individual combination of the possible subassembleys ask for a not binding offer.